A maintenance is recommended every 12 to 24 months depending on the use of the machine.
Share this page :
CircuitPro can read any gerber file of any CAD software dedicated to electronic development. We can also import some .dxf files. Inoveos can assist you if you have trouble exporting / importing your files.
Yes ! Once the ProConduct paste has been cured, it can be reflow soldered at 250°C and manually soldered up to 380°C.
The depth of penetration depends on the technology used : With a mechanical solution we will go in by 60 to 100µm approximately as from the surface of the material. With a laser we will go in by approximately 10µm more than the thickness of the metallization.